29-Inch

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The DHR II is the gold standard for riders wanting maximum traction and cornering grip when trail conditions get loose and muddy. - Ramped paddle-shaped center knobs roll efficiently and provide excellent traction for climbing and braking - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium - 3C MaxxTerra is an intermediate triple compound that provides additional grip but still retains excellent tread wear and rolling resistance qualities - Downhill casing tires are designed for extreme use in all gravity applications, made with two layers of durable 60 TPI casing material along with a large butyl rubber insert that extends from each bead into the sidewall

Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with the much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning

For deep, muddy terrain. Dirty Dan is the choice when the ground is muddy. Tall blocks bite into soft and loose terrain. Large gaps provide the necessary self-cleaning and braking traction.

THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes, the Magic Marry offers perfect all-around characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels. - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip, even in extremely muddy terrain. - Equipped with V-Grooves specially developed for Magic Mary, every stud can bite into the ground for even more grip. - Angled studs in the middle of the tread optimize the rolling characteristics.

Used on very fast and dry trails. Low rolling resistance and minimal weight. Primarily for the use on the rear wheel.

The Mezcal XC Race is built using a new XC Race Formulation and has been torture tested at the UCI elite levels. The Race Formulation employs Graphene and Silica, providing increased wet grip and suppleness, and combines a 60TPI tubeless ready casing to optimize deformation. This combination has been shown to reduce rider fatigue while simultaneously increasing race-day reliability. The continuous center line maintains fast-rolling contact, and its offset extensions are siped to multiply the number of leading and trailing edges, propelling you up the trail on climbs and increasing bite while braking. The rear siping on the shoulder knobs runs parallel to the trail with variable widths and open trailing edges, so the Mezcal corners fast on hard, slippery surfaces – despite being such a fast-rolling tire. For climbing, cornering, or careening down hill, no tire cooks like the Mezcal. - Race Formulation: Graphene + Silica Compound provides speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

Mostro Enduro Race was engineered with the new Race Formulation technology; this variant features a single, soft rubber compound powered by Graphene + Silica to offer speed and grip without compromise. It is applied on a 60 TPI multi-layer casing, offering race-tuned durability and abrasion resistance. Additional puncture protection is provided by a bead-to-bead Reinforcement Layer placed in the lower part of the casing, and an anti-puncture belt in the upper part of the casing. Finally, the Sidewall Stability Insert feature protects the tire from rim strikes and provides additional sidewall support thanks to its high-tech rubber material. - Designed and engineered to deliver unparalleled speed and control on the trails - V-formation tread pattern with alternating mid and center lugs adorned with pronounced trailing edges - Unwavering stability across rocks, roots, and loose surfaces - Progressive siping and surface-stepped technology, enhances traction and cornering prowess while facilitating rapid acceleration - Unparalleled gravity riding performance when paired with the Vittoria Air-Liner Protect insert inserts - Hookless Compatible

The Peyote delivers World Cup level speed and confidence in a range of terrain thanks to its revolutionary new tread pattern. Positioned between Terreno and Mezcal, the tread features a low-profile alternating center ribbon designed to increase speed and grip. The familiar Vittoria v-formation used in the Peyote allows the tire to dig through loose terrain to find traction while evacuating debris laterally. The alternating mid-tread tapers up to capable cornering tread, providing responsive handling and a predictable feel. These traits work to boost cornering performance by placing effective edges directly opposing the path of cornering forces, regardless of lean or cornering angles. - Race Formulation: Graphene + Silica Compound provdes speed and grip without compromise. Designed to be the absolute fastest option from point A to point B - 60 TPI Nylon Casing provides a supple feel with dependable nylon construction, providing reduced rider fatigue and increased race-day reliability. World Championship proven Tubeless-ready technology ensures easy inflation and dependable air retention - Hookless Compatible

Hans Dampf has everything to increase enduro fun. Choose it for stunning handling and the highest puncture protection on demanding trails—ascent as well as descent. - Precisely tuned stud positioning for controlled and forgiving riding at the limit - The combination of large and small shoulder studs grants the rider optimal grip in numerous conditions - Semi-open blocks ensure optimal self-cleaning properties with low rolling resistance

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

The Aspen ST is an ultra-low-profile race tire designed primarily for short-track XC use. Sometimes referred to as the "Fastpen," this tire is sure to give any racer an edge in dry conditions - Rubber: MaxxSpeed - Wide Trail (WT) sizes are optimized for 30mm inner width rims - Tubeless Ready (TR) - Category: XC Race - Recommended Uses: Dry XC Conditions - Recommendation Installation: Front or rear

The Aspen is one of Maxxis' premier XC race tires. A low center tread height allows the Aspen to roll quickly but substantial – for XC – side knobs provide cornering traction - Lightweight XC race tire - Features a high volume casing, low profile center and aggressive side knobs - EXO: additional densely woven, lightweight, flexible fabric added to casing for enhanced puncture protection - TR: tubeless ready - MaxxSpeed: new MaxxSpeed (2023) is a top-shelf rubber compound for XC racing. It’s a high-silica content compound which reduces rolling resistance while also enhancing wet traction - 170tpi casing - Compound: MaxxSpeed Silica - Bead: folding - Tire Type: tubeless ready - Weight: 650g. (29x2.25")

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.