Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Wheels

(591 matches)
PowerTap G3 Rear Hub
$599.99
Some equipment makes your bike faster. Some makes you faster! PowerTap’s proven, 325-gram PowerTap G3 Hub does both. Make the most of your time on the bike — nail your intervals, stay within your targeted zones for long rides, and track your Training Stress Score (TSS) and Chronic Training Load (CTL) for long-term gains and reaching your goals. The low-profile G3 hub is made of light, durable aluminum with wide flange spacing for a great wheel. The G3 is accurate to within +/-1.5%, and is ANT+ capable for use with your favorite compatible cycling computer (sold separately). Plus, all the electronics are held within a small, easily removed outer cap.
CycleOps Trainer Skewer
$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.
Zipp 303 Firecrest Carbon Disc Brake Rear Wheel (Clincher)
$1,300.00
Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Stan's NoTubes Standard Tubeless Kit
$63.95
Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Surly Clown Shoe
$170.00
After a red nose, one of the most identifiable traits of a clown is his footwear. They're huge. So are Surly's Clown Shoe rims. At 100mm wide they greatly increase the tire footprint and give you more stability and float in loose terrain. The material between the spokes is drilled out to reduce weight and 64 spoke holes let you build them up centered or offset.
Surly Rolling Darryl Rim
$125.00
Surly's Rolling Darryl is a seriously wide single-walled rim. It's made to give wide tires an even wider footprint for better traction. Run low tire pressure and this 82mm wide rim will let you rock crawl over boulders and float through sand like you never thought possible. The material between the spokes is drilled out on one model to reduce weight.
Surly Marge Lite Rim
$115.00
Surly's Marge Lite Rim is almost the same as the Large Marge, but with a lot of material cut out. As you might imagine that reduces the weight substantially, but the engineers at Surly know what they're doing so they kept all the torsional rigidity for a strong wheel. The 64 spoke holes let you build it up offset or centered. Roll on with the Marge Lite.
Surly Ultra New Disc Front Hub
$85.00
Surly's Ultra New Disc Front Hub is a gorgeous hunk of aluminum that boasts reliable sealed bearings and a 6-bolt disc attachment. The forged chromoly axle is flex-free for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Ultra New Disc Rear Hub
$100.00
Surly's Ultra New Disc Rear Hub is just the thing for singlespeed fanatics and one-gear mountain riders. This gorgeous hunk of aluminum boasts reliable sealed bearings and a 6-bolt disc attachment on one side and threads for a singlespeed freewheel (or fixed cog) on the other. A hollow axle lets you choose how to secure it to your dropouts. You have choice between the included fixing bolts or a quick release skewer (sold separately). And, that aforementioned chromoly axle is flex-free to take all the abuse you can dish out, and then some!
Surly Rabbit Hole Rim
$115.00 - $135.00
Surly's 50mm wide Rabbit Hole Rim lets you build a wheel that accepts a tire with a large footprint for outstanding control, and traction. This anodized-aluminum hoop has 64 spoke holes and can be built centered or offset. Also, material has been removed everywhere possible (without affecting strength) to keep the rim as light as possible for quick acceleration.
Surly Ultra New Rear Hub (135mm)
$70.00
Surly's Ultra New Rear Hub is ready for singlespeed mayhem. This gorgeous hunk of aluminum has the capability you need with reliable sealed bearings. It's available with threads for fixed cogs or freewheels, so you can set up the drivetrain of your dreams. Plus, this hub's 135mm width fits most MTB frames and the hollow chromoly axle provides a flex-free ride as well as simple quick-release skewer compatibility.
Surly Rabbit Hole 29+ Rear Wheel
$300.00 - $315.00
Surly's Rabbit Hole 29+ Rear wheel has the speed and momentum of a 29er, paired with the cushion, suspension, and traction of a fat bike. The 50mm-wide Rabbit Hole rim is a single-wall aluminum hoop that shines when paired with a 3-inch wide tire. It'll also work with 2.3-2.7-inch tires providing your frame has enough clearance. DT Swiss spokes tie it together for a capable wheel that rolls smooth and fast.
Surly Rabbit Hole 29+ Front Wheel
$290.00 - $300.00
Surly's 29+ Rabbit Hole front wheel has the speed and momentum of a 29er, and the width to give you the cushion, suspension, and traction of a fat bike. The 50mm-wide Rabbit Hole rim is a single-wall aluminum hoop that shines when paired with a 3-inch wide tire. Tying it all together are DT Swiss spokes laced to Surly's Ultra New Front Disc hub. It rolls smooth and fast, and provides incredible durability for all your off-road adventures.
Surly Marge Lite Rear Wheel
$285.00
Surly's Marge Lite Rear Wheel is the skinniest of Surly's fat bike bunch, yet still sports all the cushion, suspension, and traction that you need to float over rocks, sand, and snow. The 65mm-wide Marge Lite rim is a single-wall aluminum hoop that shines when paired with a 4- to 5-inch wide tire. Tying it all together are DT Swiss spokes laced to your choice of Surly's singlespeed rear disc hub, or a Shimano XT disc rear hub. They roll smooth and are ready and willing for all your off-road adventures.
Surly Ultra New Front Hub
$60.00
Track stars and fixed-gear converts will love Surly's Ultra New Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Ultra New Polo Front Hub
$60.00
Bike polo all stars and tough-wheel aficionados will love Surly's New Polo Front Hub. This gorgeous hunk of aluminum sports sealed bearings for all-weather reliability and low friction. The 48-hole drilling and taller flanges makes the overall wheel stiffer, and tougher--perfect for polo. And, the hollow axle is forged from flex-free chromoly for steering precision, long-lasting durability and simple quick-release compatibility.
Surly Ultra New Polo Rear Track Hub (Fixed/Free)
$70.00
Bike polo all stars and tough-wheel aficionados will love Surly's Ultra New Polo Rear Track Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings and threads for a freewheel on one side, and a fixed cog on the other so you have a choice in your gearing. Plus, this hub is available in both 120mm and 135mm widths, so any bike could become your chosen polo steed.
Surly Ultra New Roadie Rear Hub (130mm)
$70.00
Build your singlespeed or fixie bike around Surly's Ultra New Roadie Rear Hub. This gorgeous hunk of aluminum has the capability you need and reliable sealed bearings, too! It sports threads for a track cog and lockring on one side and a freewheel on the other so you can decide how you want to roll. Plus, this hub's 130mm width fits most road frames and the hollow chromoly axle provides a flex-free ride as well as simple quick release skewer compatibility.
Surly Ultra New Rear Hub (120mm)
$70.00
Track stars and fixed-gear converts love Surly's Ultra New Track Rear Hub! This gorgeous hunk of aluminum boasts reliable sealed bearings, and your choice of fixed/fixed or fixed/free gearing. Plus, this hub's 120mm width fits most track frames and the flex-free solid axle is forged from rugged chromoly.
Surly Rolling Darryl Rim
$125.00
Surly's Rolling Darryl Rim is a seriously wide single-walled rim. It's made to give wide tires an even wider footprint for better traction. Run low tire pressure and this 82mm wide rim will let you rock crawl over boulders and float through sand like you never thought possible. The material between the spokes is drilled out to reduce weight.
Surly Clown Shoe Front Wheel
$355.00
Keep that fat tires turning on Surly's Clown Shoe Front Wheel. The 100mm-wide Clown Shoe rim is a single-wall aluminum hoop that shines when paired with the fattest tires you can find. Tying it all together are DT Swiss spokes laced to a 135mm Surly Ultra New disc hub. They roll smooth and fast, and provide a solid front end for your nuttiest adventures. This wheel fits 135mm fat bike forks.
Surly Rolling Darryl Rear Wheel
$305.00 - $530.00
Surly's Rolling Darryl wheel rolls over just about anything. The 82mm-wide Rolling Daryl is a single-wall aluminum hoop that shines when paired with the fattest tires you can find. Tying it all together are DT Swiss spokes laced to your choice of Surly Ultra New singlespeed disc hub, Shimano XT, or DT Swiss 340 disc hubs. These wheels roll smooth and are ready to float through all your adventures.
DT Swiss Aero Comp 14/19/14g (Black) Spoke
$61.90
- Bladed Competition spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary, includes 12mm 14g silver alloy nipples - 190g (32/265mm) - Box of 20
DT Swiss Aerolite 14/19/14g (Black) Spoke
$93.90
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary, includes 12mm 14g silver alloy nipples - 139g (32/265mm) - Box of 20
Spank Spike Race 33 Wheelset
$499.00
Freeride strength, race performance and weight. Although proven strong enough for top-level Freeride events like Red Bull Rampage, the SPIKE Race 33 wheelset is competition-tuned for World Cup level DH racers. Every SPIKE Race 33 wheelset is hand built and trued with SPANK’s new SPIKE Hubs, offering increased engagement, lighter weight, and improved adaptability. A 32H, 3-cross configuration ensures maximum stiffness and durability. With a 28mm inner width, and Bead Bite anti-burp rim hooks, the SPIKE Race 33 wheelset delivers unparalleled traction, stability and tubeless performance in a lightweight, durable package. - Key Technologies: Bead Bite, OohBah, Dynamal Alloy - Freehub: Steel Shimano (XD available) - Adaptors Included (mm): 15x100 included (12x135 sets only) - Adaptors Available (mm): FRONT: QR / 15x100 / 20x110 REAR: QRx135 / 10x135 / 12x135 / 12x142 / 12x150 / 12x157 - Discipline: Race / Freeride
Sunlite Fat Bike Rim Strip (26-inch)
$5.99
• Rim strips for 26-inch fat bike rims
Crank Brothers Cobalt 2 Boost Wheelset
$600.00
Enthusiast-level aluminum wheels for XC/trail Massively different - Simple and beautiful, unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, black anodizing - Rim width: 21mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0/1.6/2.0 - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: cobalt, 6061-t6 - Front hub bearing: sealed cartridge 6804 (x2) - Front hub end caps: 15mm (installed), 9mm (included) - Rear hub material: cobalt, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1790g per set - Weight: 27.5-inch, 1710g per set - E-bike compatible: urban/XC e-bikes up to 350 watts max
Crank Brothers Iodine 2 Boost Wheelset
$600.00
Enthusiast-level aluminum wheels for all mountain Massively different - Simple and beautiful, our unique wheel design is based around principles of strength, stiffness, and acceleration Faster to accelerate - Low rotational inertia: unique wheel design distributes mass closer to the hub for faster acceleration and deceleration - Tubeless ready hole-less rims: stronger and no rim tape required for tubeless setup Stronger and stiffer - Twinpair spoke technology: designed using the strongest shape in construction, the triangle, to maximize strength and stiffness - Beautifully simple single spoke length: easy to true and replaceable without removing tire - Rim material: 6061-t6, smooth weld joint - Rim finish: shot peen, flat black anodizing - Rim width: 23mm - Rim depth: 19.5mm - Spoke material: stainless steel - Spoke butting: 2.0 straight gauge - Spoke length: 166mm - Spoke pins: solid 7075-t6 aluminum - Nipple size: 3.2 x 139mm - Front hub material: iodine, 6061-t6 - Front hub bearing: sealed cartridge 6805 (x2) - Front hub end caps: 15mm (installed), 20mm (included) - Rear hub material: iodine, 6061-t6 - Rear hub bearings: sealed cartridge 6903 (x2), 6902 (x2) - Rear hub end caps: 12x142mm (installed), 10x135mm (included) - Freehub: 3-pawl, 21T, steel - XD driver: XD driver compatible, available separately - Skewers: skewers not included, available separately - Weight: 29-inch, 1910g per set - Weight: 27.5-inch, 1845g per set - E-bike compatible: trail/am e-bikes up to 350 watts max
GSport Birdcage Rim
$79.99
Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm
GSport Simian Front Hub
$79.99
A high quality, sealed front hub with in-bound axle bolts that is guard compatible. The hub’s steel collar shape simplifies removal for bearing and axle maintenance. An oversized axle and bearing configuration is used for unmatched durability. Simian Front Hub Guard also available. TECHNICAL SPECIFICATIONS - Spoke Configuration: 36 hole - Hub Shell Material: 7075-T6 aluminum - Hub Shell Bearings: 6804RS sealed cartridge ball bearing - Axle: 3/8" 4130 chromoly axle bolts with 20mm, 7075-T6 aluminum female axle with steel helicoiled threads - Guard Option: Simian specific, 7076-T6 aluminum (available separately) - Effective Flange Diameter: 45.1mm - Flange to Center Distance: 31.6mm - Weight: 266g / 10.5oz
Page 1 of 20 Next page